The cost of a roof repair depends on what is wrong, how much of it there is and how hard it is to reach. A few broken tiles make a short job. Ridge re-pointing, valley replacement and flashing work take longer. A fair quote is written after an inspection and lists each repair.
What drives the price, job by job
| Repair | What moves the price |
|---|---|
| Broken or slipped tiles | How many tiles, how hard they are to match, and how easy the roof is to reach. See how a tile is replaced. |
| Ridge re-pointing | Length of ridge, the number of hips, and whether pointing is enough or the caps need full re-bedding. |
| Valley repair or replacement | Length of the valley, patching or new iron, and how many tiles come up and go back. |
| Flashings | The number of junctions, the material and the size of any chimney. See signs flashing needs replacing. |
| Leak detection and repair | Time spent tracing the source, then the repair itself. |
| Gutter and fascia repairs | Length affected, sagging or rusted sections, and access. |
How much does it cost to repoint a roof?
It follows the length of the ridge and the number of hips. A short ridge on a small house is a smaller job than a long ridge with several hips. Re-pointing, where the caps are solid and only the joints have cracked, is quicker than full re-bedding, where the caps come off and go back on fresh mortar. We tell you which one your roof needs and why, with photos. See ridge capping repairs.
Why we do not quote over the phone
A price from the phone is a guess, and a guess that is too low gets corrected after the work starts. The faults you cannot see from the ground often decide the bill. Photos help us give you a rough idea. The written price comes after we have been on the roof.
What a fair quote includes
- Each repair listed separately, so you can see where the money goes.
- The materials, including what the replacement tiles or flashing will be.
- What happens if we find more. You should be told before any extra work goes ahead.
- The warranty terms in writing. Our work carries a 5-year workmanship warranty.
- Photos before and after. A roofer who documents the job usually works to a standard.
“Nathan from O’Malley’s Roofing cleaned our gutters, relocated some worn out tiles and replaced some broken ones. All in a couples hours with very little fuss. Great job! Would definitely be using them again. Thanks!”
Ways to keep repair costs down
- Fix small faults early. A cracked tile costs little. Left through a few winters, it soaks the batten and the ceiling as well.
- Bundle jobs. Gutter cleaning, a few tiles and a ridge check on the one visit saves a second set-up.
- Send photos and your suburb. It speeds up the first conversation.
- Book before winter, not after the first big storm.
- Be careful of door-knockers who turn up after bad weather with a price and a deadline.
Repair or restore?
If the roof is worn all over rather than faulty in a few places, repairs add up and a restoration makes more sense. Read repair vs restoration and whether restoration is worth it, and the restoration cost guide if you are weighing the two. We work across Melbourne and the western suburbs, and you can see where we go.
Send a couple of photos and your suburb through the form, or ring 0430 545 669 and talk it through.
A few more questions
Are quotes free?
Yes. We look at the roof, photograph the faults and put the price in writing, and there is no charge for the quote.
Can you give me a price from photos?
We can give you a rough idea from photos. We price after we have been on the roof, because the faults you cannot see from the ground often change the job.
Why do two roofers quote such different prices?
Usually because they are quoting different work. One may include the ridge and the valley and the other only the tiles. Ask each to list what is included, then compare like with like.

