Roof flashing is the metal, lead or membrane that seals joints where the roof meets a chimney, wall, pipe or valley. It needs replacing when it rusts, lifts, cracks or loses its seal. A wrong overlap leaks and the work is at height, so flashing is a job for an experienced roofer, not a weekend project.
Where flashing sits, and what goes wrong
| Where | What fails | What you notice inside |
|---|---|---|
| Chimney | Sealant cracks, a section lifts, joints rust. | A stain on the ceiling or chimney breast after rain. |
| Roof meeting a wall | Flashing lifts or cracks along the join. | A damp patch on the wall below the roofline. |
| Valley | Rust holes, or leaves block the channel. | A drip in the roof space, or a stain along the ceiling. |
| Pipes and vents | Rubber boots perish in the sun. | A drip near the pipe or exhaust fan. |
| Gable edge | A gap opens between tile and wall. | Stains after wind-driven rain. |
Signs your flashing needs replacing
- Rust, or flaking paint on metal flashing.
- Edges that lift away from the tile or wall, or open gaps along a join.
- Sealant that has cracked, shrunk or gone missing.
- Lead that has sagged or pulled away from the tile.
- Rubber pipe boots that have cracked or gone hard.
- Stains near a chimney or wall after rain, or daylight in the roof space.
Check from the ground and from the roof space with a torch. Do not climb up to look. Not sure if it is a leak at all? Read how to tell a leak from condensation.
Chimney flashing
Flashing around a chimney is several pieces working together. An apron runs along the low side, stepped pieces climb the sides, a back gutter sits on the high side, and a cap flashing tucks into the mortar joints to cover the top edge. Chimneys are a common trouble spot because every one of those joins can fail. If the chimney mortar is crumbling too, the new flashing has nothing sound to sit in, so the two jobs often go together.


Do you need a professional?
For most homes, yes. These are the reasons:
- Height. A fall from a roof can cause serious injury, and tiled roofs are brittle and slippery.
- The overlaps matter. Flashing works because water runs over each joint, not into it. One piece the wrong way round leaks.
- Tiles have to be lifted and relaid. Doing that without breaking them takes practice.
- Sealant is not a repair. A bead over a gap holds for a short while. It does not replace the flashing.
- Mistakes show up late. A poor flashing job leaks months later, inside a ceiling you have just painted.
What you can do yourself is spot the problem early and photograph it, so the quote is quicker and more accurate.
Who installs roof flashing?
Roofers and roof plumbers fit metal flashing. On a tile roof, choose someone who works on tile roofs regularly, because the flashing has to be shaped to the tile profile. Ask for photos of the finished job, details of their insurance and the warranty in writing. Our work carries a 5-year workmanship warranty, and our flashing and valley service covers lead, metal and membrane flashing.
What moves the price
- The number of junctions to be done, and the size of the chimney if there is one.
- The material. Lead costs more than basic metal, but it moulds to the tile profile.
- Access, and whether the house is one storey or two.
- The condition of the tiles and mortar around it.
- Whether tiles have to be lifted and relaid to reach the joint.
- Other repairs done on the same visit, which saves a second set-up.
We price after we have been on the roof, not before. See the repair cost guide for how that works, then request a quote.
“Nathan inspected the roofs of my two properties and provided a competitive quote for the Roof Repointing work. He also found some cracked tiles and a crack on a vent flashing. His quote included fixing these as well. He did an excellent work and completed both jobs on time. I would highly recommend him for any roofing work.”
A few more questions
Can I fix flashing with sealant?
A bead of sealant can slow a drip for a while. It does not repair rusted, lifted or missing flashing, and the water usually finds a way back. The lasting fix is to replace the failed section.
How long does roof flashing last?
It depends on the material, the sun exposure and how well it was fitted. Sealants dry out sooner than the metal does. A roofer can judge the state of yours at an inspection.
Will insurance pay for flashing repairs?
Policies differ. Wear and tear is commonly excluded, while damage from a storm may be covered. Ask your insurer, and we can give you photos of the fault and a written price to send them.
